201290 201292 201395 201286 201844 201845 201846 210052 210053 537 WELDON 32 mm (1.1/4") TOOL HOLDER WITH MORSE TAPER FOR ANNULAR CUTTERS SHANK Tool holder WITH INTERNAL COOLING for annular cutter with shank Weldon 32 mm (1.1/4") Morse taper (MT) Tool holder Art. Notes 3 For drill depths more than 55 mm 2 part ejector pins must be used. For diameters more than 100 mm we recommend MT 4 or MT 5 morse taper. * All Quick-Change holders with internal cooling, comes with the proven Quick-change coolant hose system. 4 5 Tool holder WITHOUT INTERNAL COOLING for annular cutter with shank Weldon 32 mm (1.1/4") Morse taper (MT) Tool holder Art. Notes 3 For drill depths more than 55 mm 2 part ejector pins must be used. For diameters more than 100 mm we recommend MT 4 morse taper. 4 Tool holder extra long WITH INTERNAL COOLING for annular cutter with shank Weldon 32 mm (1.1/4") Morse taper (MT) Tool holder Art. Notes 3 With this tool holder replugging of the 2-pieces ejector pin is not necessary. You can drill as deep as 110 mm in one working process with a 1-part ejector pin. For diameter more than 100 mm we recommend MT 4 morse taper. * All Quick-Change holders with internal cooling, comes with the proven Quick-change coolant hose system. 4 Accessories Tool holder Reduction sleeves Specification Length Art. Reduction from MT 3 (outside) to MT 2 (inside) 112 mm Reduction from MT 4 (outside) to MT 3 (inside) 140 mm Spare parts see page 546 * * 110 mm | 4" 110 mm | 4" * 90 mm | 3.1/2" * 80 mm | 3" * 80 mm | 3" 90 mm | 3.1/2" 75 mm | 3" I I I I I I I I I 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=