201141 201141A 592 55 mm 2" 55 mm 2" HOLE SAWS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com Handheld machines Maximum recommended 40 mm Maximum recommended cutting depth 50 mm Maximum possible cutting depth 55 mm Stationary and core drilling machines Maximum recommended 150 mm Maximum recommended cutting depth 55 mm Maximum possible cutting depth 55 mm Super heavy construction → All hole saws come with exchangeable shank and drill → Quick removal of drilled core through ejector spring for hole saws 19–150 mm → Quick removal of drilled core possible from 14 mm see Power-Drill 4000 System see page 590 Application note: For material thickness over 15 mm it may be necessary (depending on the chip flow) to lift the drill and remove the chips several times. If drilling maximum cutting depth please remove the ejector spring. Use only good cutting oil for metals (see from page 1369). PROPERTIES 594 ACCESSORIES APPLICATION APPLICATION Carbide tipped hole saw, drill depth 55 mm | 2". Complete with shank, centre drill and ejector spring Carbide tipped hole saw, drill depth 55 mm | 2". Hole saw body only Alu Alu Steel Steel Stainless Stainless Copper, brass, tin Copper, brass, tin Plastics GRP/CRP Plastics GRP/CRP Sandwich materials Sandwich materials Grey cast iron Grey cast iron 4.0 mm Cutting width Shank 14-150 mm = 13 mm Also ideal for drilling into pipes Ejector spring Centre drill TiALN coated come with cross grinding for centering without running off (centre punching not neccessary) Make from the hole saw a universal tool for almost all types of machines. Choose from the accessories (see pages 594-595) your suitable shank. < 1400 N > 900 N > 10% Si < 1400 N > 900 N > 10% Si POWER-MAX SUPER HEAVY-DUTY 55 POWER-MAX SUPER HEAVY-DUTY 55 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=