201141A 201134 201137 201113 201115 201156 201123 201115 201115 201533 201532 594 14-60 mm I 61-100 mm I I I 105-150 mm I SDS PLUS SDS PLUS 14-100 mm I I 13 mm 13 mm 13 mm 8 × 110 mm 8 × 110 mm 6 × 110 mm 8 × 110 mm I POWER-DRILL 4000 6.34 × 105 mm 13 mm I 14-120 mm I 1 3 4 2 HOLE SAWS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com Spare parts for Power-Drill 4000 see page 618 Do not use hammer-function. Spare ejector drill ACCESSORIES FOR HANDHELD MACHINES SHANKS WITH SUITABLE CENTRE DRILL / SPRINGS SHANK WITH SUITABLE CENTRE DRILL / SPRING Operating mode: A. Centre punch the workpiece. Soft materials such as plastics, wood and wood based materials can possibly be done without the centre punch. B. Place the ejector drill 1 in the middle of the centre mark. Use little pressure (feed rate) until the hole saw reaches a minimum cutting depth of 0.5 mm. The hole saw in self-centered now. Feed rate can be increased. C. An ejector spring 2 which is installed in the arbor puts pressure on the ejector drill 1. D. The ejector drill 1 ejects the core 4 after drilling process. (If the core will not be ejected, please increase the spring pressure on the ejector drill by turning the Allen screw 3 clockwise). Advantages: 1. After each drilling process the core will be ejected reliably. 2. Fits all POWER-MAX hole saw diameters from 14 mm (page 578). 3. Since the ejector drill does not drill through the material (as usual with hole saw with centre drills), a continuous drilling operation is possible. The inevitable 'crashing' of the hole saw on the workpiece after the break through of the centre drill will be avoided (the main reason for tooth fracture at the hole saw). Movie POWER-MAX SUPER HEAVY-DUTY 55 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=