201020 201020 201404 201523 201114 201116 600 12 mm 15/32" I I I I 6 × 47 mm 8 × 53 mm HOLE SAWS CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com Handheld machines Maximum recommended 180 mm Maximum recommended cutting depth 6 mm Maximum possible cutting depth 12 mm Stationary and core drilling machines Maximum recommended 200 mm Maximum recommended cutting depth 8 mm Maximal mögliche Schnitttiefe 12 mm PROPERTIES APPLICATION HEXAGON SCREW FOR FIXING THE CENTRE DRILL CENTRE DRILL WITH SPRING = For hole saws 14-150 mm For hole saws 14-150 mm For hole saws 155-200 mm = For hole saws 155-200 mm Tapered centre drill for centering without running off. Centre punching not necessary. Ejector spring Shank 14-69 mm = 10 mm 70-200 mm = 13 mm Smooth running version specifically for portable machines (of course, also to be used for stationary machines) Because thin cutting width of only 1.8-2.0 mm: → Low cutting pressure → fast, smooth-running drilling → excellent guidance and control during drilling → Quick removal of drilled core through ejector spring for all hole saws. (If drilling maximum cutting depths please remove the ejector spring) Application note: At thicker materials: Cut 2-3 mm per cutting process, remove chips afterwards. Use only good cutting oil for metal (see from page 1369 14-150 mm = 1.8 mm 155-200 mm = 2.0 mm Cutting width Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Sandwich materials Grey cast iron Carbide tipped hole saw, drill depth 12 mm | 15/32". Complete with shank, centre drill and ejector spring Spare parts for Carbide tipped hole saw, drill depth 12 mm | 15/32" < 1400 N > 900 N > 10% Si M6 x 8 M8 x 8 EASY-CUT 5 EASY-CUT 5 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=