201500 201515 201524 201375 201525 201522 201508 201529 608 DIN 238 B16 DIN 238 B16 DIN 238 B16 11 mm 7/16" 11 mm 7/16" 300 mm 300 mm 9.5 mm 3/8" 11 mm 7/16" 1-13 mm 1-13 mm I I I I I I I DIN 238 B16 CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com BI-METAL HOLE SAWS Spare screws to fix the centre drill into the arbor, see page 618 OPERATING MODE CORE QUICK-EJECTION HOLDER Groove Accessories for Bi-Metal Cobalt 8% hole saw, drill depth 38 mm | 1.1/2" 1.) Bring the tool holder in the initial position (1) 2.) Screw the hole saw onto the tool holder. Attention! Tighten the hole saw just slightly. Otherwise the rubber ring gets into the ejector pin holes. Push the ejector pins up to the groove (2), in the ejector pin holes of the hole saw The ejector pins don’t have to extend into the hole saw (3) 3.) Drill 4.) After drilling push the ejector pins forward to eject the core (4) Push it forwards to eject the core EXTENSIONS 300 mm MORSE TAPER + SUITABLE CHUCKS MORSE TAPER :2 MORSE TAPER :3 Quick release chuck Chuck RIM COUNTERSINK CARBIDE TIPPED FOR BI-METAL HOLE SAW 68 mm Perfect assembly of sockets in e.g. gypsum, plaster board, wood and similar. Carbide teeth Suitable for arbor Art. 20 1503, 20 1521, 20 1528, 20 1169, 20 1511 For arbor Art. 20 1507, 20 1503, 20 1169 For arbor Art. 20 1521 + 20 1528 1 3 2 4 110 mm BI-METAL COBALT 8% 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=