201776045 201787110 2290110175 201787120 201777030 201777020 201777040 201777010 201777070 201777060 201777050 694 E H I N H I I I I I I 9/16" 11/16" 3/4" I 15/16" 13/16" 1" Weldon 19 mm 3/4" d3 l1 d1 7/8" I I I I 82° 1460 CONTACT INFORMATION For more information please call +44 1530 261 145 or send an email to sales@atagarryson.com PILOTS Suitable morse taper see pages 535-537 Alu Steel Stainless Copper, brass, tin Plastics GRP/CRP Grey cast iron APPLICATION Hastelloy, Inconel, exotic materials SPARE PARTS Carbide inserts Packing unit 4 pcs. 4× TORX mounting screw Packing unit 4 pcs. 1× TORX wrench Hardox 400 COUNTERSINKS 82° WITH REPLACEABLE · 2-CUTTING WITH WELDON SHANK CARBIDE INSERTS + PILOTS 4 INSERTS + d1 Inch d1 mm d3 Inch d3 mm Total length L1 Inch mm 1.49/64" 45 3/8" 10 2.53/64" 72 The countersinks come inclusive: → 4 pieces carbide inserts coated incl. 4 TORX mounting screws and 1 TORX wrench. Fully assembled. → The triangular inserts are rotatable. This means that all 3 cutting surfaces can be used for 3 times more lifetime. → Suitable pilots pins see below. Cutting data PROPERTIES Tungsten Carbide tipped for maximum tool life, even in most difficult materials. For countersinking in: → Abrasive and hard steel with a strength of over 1000 N/mm2 → Grey cast iron over 240 HB → High-alloyed chromium steel such as stainless (V2A / V4A) → Acid resistant steel → Titanium and titanium alloys → All further steel sorts, cast iron, non-ferrous metals where maximum tool life are desired. The pilot provides greater stability and accuracy. If drilling without pilots, please take care that the countersink is central to the drilled hole. < 1400 N < 900 N > 10% Si 11 Index 10 9 OIL 8 7 6 5 4 3 2 1
RkJQdWJsaXNoZXIy MTgxNTQ=